JavaScript appears to be disabled in your browser. JavaScript must be enabled in order to utilise the full functionalilty of this website.

Register Account trade

(.04) Complete Movements & Kits

Home
(.04) Complete Movements & Kits

Complete Movements & Kits

STANDARD QUARTZ MOVEMENT: 12mm SHAFT

STANDARD QUARTZ MOVEMENT: 12mm SHAFT Case 56mm wide X 56mm high. 17mm deep. Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 0.25-3.5mm. Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through

£6.80

STANDARD QUARTZ MOVEMENT: 16mm SHAFT

STANDARD QUARTZ MOVEMENT: 16mm SHAFT Case 57mm wide X 52mm high. 17mm deep. Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 3.5-7mm. Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through whi

£6.80

STANDARD QUARTZ MOVEMENT: 21mm SHAFT

STANDARD QUARTZ MOVEMENT: 21mm SHAFT Case 56mm wide X 56mm high. 17mm deep. Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 7-11mm. Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through whic

£6.80

STANDARD QUARTZ MOVEMENT: 26mm SHAFT

STANDARD QUARTZ MOVEMENT: 26mm SHAFT Case 56mm wide X 56mm high. 17mm deep. Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Max dial thickness, 14mm. Sec. shaft, 0.8mm. Supplied with nut to hold the minute hand on, through wh

£12.42

HIGH TORQUE QUARTZ MOVEMENT

HIGH TORQUE QUARTZ MOVEMENT For applications with longer than average hands, these have more strength than standard movements. Maximum dial thickness, 7mm. AA battery required. Normal I-shift quartz hands fit the shafts.

£12.16

VERY HIGH TORQUE QUARTZ MOVEMENT FOR LARGE DIALS

VERY HIGH TORQUE QUARTZ MOVEMENT FOR LARGE DIALS Robust Quartz clock movement, suitable for our longer 0474 hand lengths, e.g. 255mm, 305mm, 350mm and 450mm spade hands. I-shaft. Not weatherproof. 52mm wide. 65mm high. 25mm deep. Total shaft length 25mm. M

£29.22

RUBBER WASHERS FOR QUARTZ MOVEMENTS

RUBBER WASHERS FOR QUARTZ MOVEMENTS 25 extra rubber washers.

£8.20

BLIND NUTS FOR QUARTZ MOVEMENTS

BLIND NUTS FOR QUARTZ MOVEMENTS 5 Blind I-shaft nuts for use when no second hand is used.

£5.95

PENDULUM DRIVE UNIT

PENDULUM DRIVE UNIT Fits on our standard quartz unit (not included), to turn it into a pendulum movement. The pendulum has no bearing on the timekeeping. AA battery required. Rod length 250mm. (320mm from hand shaft to bottom of bob) 55mm bob. Contained in

£10.76

8 DAY MOVEMENT 135mm SPRING DRIVEN TYPE A

8 DAY MOVEMENT 135mm SPRING DRIVEN TYPE A 43mm Bob. Swing 90mm. Distance between centre of winding shaft and hand shaft 32.5mm

£161.71

30 HOUR INSERTION MOVEMENT 401 BRASS

30 HOUR INSERTION MOVEMENT 401 BRASS Bezel o/d 62mm. Hole o/d 55-60mm.

£47.95

30 HOUR INSERTION MOVEMENT 407 BRASS

30 HOUR INSERTION MOVEMENT 407 BRASS Bezel o/d 65mm. Hole o/d 55-60mm.

£44.68

30 HOUR INSERTION MOVEMENT 408 BRASS

30 HOUR INSERTION MOVEMENT 408 BRASS Bezel o/d 65mm. Hole o/d 55-63mm.

£47.95

30 HOUR INSERTION MOVEMENT 447 BRASS

30 HOUR INSERTION MOVEMENT 447 BRASS Bezel o/d 85mm. Hole o/d 55-83mm.

£44.53

SECOND HAND FOR SYNCHRONOUS MOVEMENT

SECOND HAND FOR SYNCHRONOUS MOVEMENT 130mm red.

£9.91

MINIATURE PUBLIC CLOCK COLLETS

MINIATURE PUBLIC CLOCK COLLETS Special hand collets with screw fixing Hour hand is 6.4mm inside diameter and is suitable for a hand with an 8mm hole. Minute hand is 4.4mm inside diameter with grub screw and uses a 6mm hole in the minute hand. Solid brass.

£10.90

400 DAY ROTARY QUARTZ MOVEMENT

400 DAY ROTARY QUARTZ MOVEMENT Fully working rotary quartz movement which oscillates to mimic many 400 day designs. Total height 85mm, width 58mm square. Runs on 1 'AA' battery which is not included. This is for aesthetic purposes only and not a timekeepin

£30.01

TIDE CLOCK Whether you're ..... Launching a Boat - Going Fishing - Collecting Bait - Beach Combing or just Watching the Waves... A Tidal Indicator is a must.

£81.06

MULTI-EVENT TIMER

MULTI-EVENT TIMER Pocket size. Colour: White. 31 possible alarms a day, from 8am -11pm. Easy to use. High pitched yet unobtrusive alarm. Can be used by the blind. Ideal as a medication reminder. Recommended by the Parkinson's Society. Uses 2 x 389 batterie

£33.20

Pack of 25 - PENDULUM DRIVE UNIT Fits on our standard quartz unit (not included), to turn it into a pendulum movement. The pendulum has no bearing on the timekeeping. AA battery required. Rod length 250mm. (320mm from hand shaft to bottom of bob) 55mm bob.

£36.00

STANDARD QUARTZ MOVEMENT: 16mm shaft Chinese style round shafts. Case 57mm wide X 52mm high. 17mm deep. Hanger, rubber washer and brass nut to hold the movement to the dial supplied. Dial thickness, 3.5-7mm. Sec. shaft, 0.8mm.

£6.80