Tools

MAINSPRING HOLE PUNCH For punching holes in carbon steel springs. Also suitable for punching brass, copper, aluminium and plastic. Gauge depth of upto 50mm, with hardened punches and dies in the following inch sizes: 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 + 9/32

£91.86

REEDED BRASS TUBE Ready for polishing and lacquering, this brass tube is ideal as a replacement for any architectural style case needing new columns. 9 inches long. 3/4 inch diameter. 0.32inch wall thickness Fits neatly with pillar cap, part no. 0279 19311

£15.91

WOODEN ROSETTE 43 x 9mm Pressed.

£11.42

WOODEN ROSETTE 60 x 9mm Pressed.

£12.02

13/16inch DIE HOLDER Steel construction.

£17.17

TAP WRENCH 1/2inch (1/16inch-1/2inch)

£19.26

TAP WRENCH 1/4inch

£19.26

EXTERNAL DRAPER MICROMETER 0-1inch Lower priced but accurate Draper micrometer for everyday use. Graduated in 0.0001inch.

£70.67

STAINLESS STEEL VERNIER Reading to 0.001inch and 1/50mm. Fine adjustment reading. Range 6inch x 150mm.

£82.66

ENGINEERS SQUARE 4inch square with solid steel stock.

£34.37

AUTOMATIC CENTRE PUNCH Delivers a sharp blow to the required point when pressed down. Spring pressure is adjustable for different materials.

£16.18

POCKET SCRIBER, STEEL TIP For marking watches and clocks after repairs and general scribing.

£14.80

CENTRE FIXING NUT KEY Adjustable key for centre fixing nuts on modern clocks. Suitable for slots.

£11.89

400 DAY BEAT SET TOOL For final adjustments to the beat without loosening the retainer. Highly recommended

£31.39

PINVICE Double ended pintongs with reversible chucks. Capacity 0 - 2.35mm

£15.86

LATHE BELTING 2mm Sold by the metre.

£10.37

LATHE BELTING 3mm Sold by the metre.

£12.68

LATHE BELTING 4mm Sold by the metre.

£13.14

LATHE BELTING 5mm Sold by the metre.

£13.61

LATHE BELTING 6mm Sold by the metre.

£15.38

CLOCK DIAL CUTTER An ingenious tool for cutting circles in card from 2inch - 16inch diameter. Cutter complete

£36.05

RING CUTTER For safely cutting rings from fingers. For emergency use, or when the finger has outgrown the ring. Cuts a neat line that can be easily repaired.

£19.92

12 PIECE NEEDLE FILE SET

£33.64

3inch WOODEN FILE HANDLE With small hole for most needle files and other general use. Can be used for broaches etc.

£4.76

FILE HANDLE, 4inch WOODEN

£5.16

FILE HANDLE 5inch WOODEN

£5.09

PIVOT FILE AND BURNISHER Smooth file on one side, burnisher on the other. Approximately 4inch long. Swiss made by Vallorbe.

£50.71

INSPECTION MIRROR FIXED TYPE. STEEL. BOILABLE. 160MM LONG. Total length 160mm. Flat glass mirror. Mirror 20mm diameter. Solid contruction. Boilable.

£5.75

KEY SIZING GAUGE Eliminates guesswork when ordering or using up old keys. Solid construction with sizes from 1.75mm - 6.00mm.

£37.50

PIERCING SAW FRAME Metal saw with wooden handle. Unadjustable.

£33.72

ADJUSTABLE SAW FRAME. Swiss style aluminium saw frame. Comfortable rubber grip. Quick release blade clamps. Well constructed.

£26.23

SWISS PIERCING SAW BLADES 0.18mm Pitch: 32

£7.73

SWISS PIERCING SAW BLADES 0.24mm Pitch: 23.5

£7.60

SWISS PIERCING SAW BLADES 0.28mm Grade 3/0

£7.60

SWISS PIERCING SAW BLADES 0.30mm Pitch: 19. Grade 2/0

£7.60

SWISS PIERCING SAW BLADES 0.34mm Grade 1

£8.52

SWISS PIERCING SAW BLADES 0.38mm Pitch: 15 Grade 2

£8.92

SWISS PIERCING SAW BLADES 0.50mm Pitch: 11

£8.92

EYEGLASS WITH SPECTACLE CLIP 3 1/2inch (2.8x) glass lens in non- reflective body and spectacle frame clip. Fits all types of frame.

£10.70

EYEGLASS 3 1/2inch (2.8x) glass lens in non-reflective body.

£10.10

CUTTING BROACH NUMBER 80 Diameter 0.33mm. Length 31mm.

£6.88

CUTTING BROACH NUMBER 78 Diameter 0.38mm.Length 31mm.

£6.88

CUTTING BROACH NUMBER 76 Diameter 0.45mm. Length 36mm.

£6.74

CUTTING BROACH NUMBER 70 Diameter 0.68mm. Length 40mm.

£6.88

CUTTING BROACH NUMBER 68 Diameter 0.76mm. Length 44mm.

£6.88

CUTTING BROACH NUMBER 66 Diameter 0.81mm. Length 44mm.

£6.74

CUTTING BROACH NUMBER 62 Diameter 0.94mm. Length 48mm.

£6.74

CUTTING BROACH NUMBER 56 Diameter 1.14mm. Length 52mm.

£6.74

CUTTING BROACH NUMBER 54 Diameter 1.39mm. Length 56mm.

£7.46

CUTTING BROACH NUMBER 48 Diameter 1.90mm. Length 65mm.

£10.70

CUTTING BROACH NUMBER 46 Diameter 2.00mm. Length 70mm.

£8.20

CUTTING BROACH NUMBER 42 Diameter 2.33mm. Length 75mm.

£10.24

CUTTING BROACH NUMBER 40 Diameter 2.46mm. Length 75mm.

£12.88

CUTTING BROACH NUMBER 36 Diameter 2.69mm. Length 80mm.

£12.29

CUTTING BROACH NUMBER 32 Diameter 2.92mm. Length 83mm.

£10.18

CUTTING BROACH NUMBER 26 Diameter 3.70mm. Length 95mm.

£15.25

CUTTING BROACH NUMBER 22 Diameter 3.98mm. Length 95mm.

£12.55

CUTTING BROACH NUMBER 18 Diameter 4.26mm. Length 100m.

£12.74

CUTTING BROACH NUMBER 16 Diameter 4.44mm. Length 100mm.

£14.14

CUTTING BROACH NUMBER 12 Diameter 4.70mm. Length 100mm.

£16.31

CUTTING BROACH NUMBER 8 Diameter 5.00mm. Length 105mm.

£16.94

CUTTING BROACH NUMBER A Diameter 5.94mm. Length 105mm.

£21.88

CUTTING BROACH NUMBER C Diameter 6.14mm. Length 110mm.

£21.23

CUTTING BROACH NUMBER H Diameter 6.75mm. Length 120mm.

£26.03

CUTTING BROACH NUMBER I Diameter 6.90mm. Length 120mm

£25.37

CUTTING BROACH NUMBER K Diameter 7.13mm. Length 120mm

£26.32

CUTTING BROACH NUMBER L Diameter 7.36mm. Length 120mm

£27.68

CUTTING BROACH NUMBER N Diameter 7.67mm. Length 120mm

£43.31

CUTTING BROACH NUMBER O Diameter 8.02mm. Length 125mm

£31.10

CUTTING BROACH NUMBER P Diameter 8.20mm. Length 125mm

£32.33

CUTTING BROACH NUMBER Q Diameter 8.43mm. Length 125mm

£34.44

CUTTING BROACH NUMBER R Diameter 8.61mm. Length 130mm

£34.44

CUTTING BROACH NUMBER U Diameter 9.34mm. Length 130mm

£41.77

CUTTING BROACH NUMBER V Diameter 9.57mm. Length 130mm.

£41.27

CUTTING BROACH NUMBER Z Diameter 10.48mm. Length 135mm.

£53.39

ECONOMY BROACH SET: 6 PIECES 0.80mm to 2.30mm

£15.91

ECONOMY BROACH SET: 6 PIECES 2.40mm to 6.20mm

£27.97

FLAT ROUND CLOCKMAKERS STAKE Round stake with 9 holes.

£15.91

FLAT RECTANGULAR STAKE Rectangular stake with 36 holes

£15.91

BRASS SPLIT STAKE Adjustable brass split stake with 9 holes.

£18.68

ROLLER CUTTERS OR SINKERS Set of 6 double ended roller cutters, to create oil sinks in freshly inserted bushes.

£150.38

BURR REMOVER Hollow centred, with four cutting edges. Insert a pin to locate the cutter when removing excess bushing.

£73.43

BERGEON BUSHING OUTFIT REAMER 1.78mm Replacement reamer only.

£42.72

BERGEON BUSHING OUTFIT REAMER 1.97mm Replacement reamer only.

£28.63

BERGEON BUSHING OUTFIT REAMER 2.47mm Replacement reamer only.

£29.72

BERGEON BUSHING OUTFIT REAMER 2.68mm Replacement reamer only.

£46.61

BERGEON BUSHING OUTFIT REAMER 2.97mm Replacement reamer only.

£29.65

BERGEON BUSHING OUTFIT REAMER 3.47mm Replacement reamer only.

£29.42

BERGEON BUSHING OUTFIT REAMER 3.97mm Replacement reamer only.

£50.92

BERGEON BUSHING OUTFIT REAMER 4.47mm Replacement reamer only.

£30.96

BERGEON BUSHING OUTFIT REAMER 4.66mm Replacement reamer only.

£34.27

BERGEON BUSHING OUTFIT REAMER 4.97mm Replacement reamer only.

£44.90

BERGEON BUSHING OUTFIT REAMER 5.47mm Replacement reamer only.

£30.08

BERGEON BUSHING OUTFIT REAMER 5.85mm Replacement reamer only.

£34.27

BERGEON BUSHING OUTFIT REAMER 5.97mm Replacement reamer only.

£51.29

BERGEON BUSHING OUTFIT REAMER 6.47mm Replacement reamer only.

£30.08

BERGEON BUSHING OUTFIT REAMER 6.97mm Replacement reamer only.

£51.29

BERGEON BUSHING OUTFIT REAMER 7.47mm Replacement reamer only.

£31.03

BERGEON BUSHING OUTFIT REAMER 7.97mm Replacement reamer only.

£51.29

BERGEON BUSHING OUTFIT REAMER 8.47mm Replacement reamer only.

£31.98

(.11) Tools