Barometer Parts

BAROMETER SETTING KNOB BONE 25mm set knob for wheel barometers. Brass shaft with 2mm internal square. Genuine bone, not Ivorine. Outside diameter of shaft 4.25mm. Length of shaft 20mm.

£19.99

BAROMETER SETTING KNOB BRASS Georgian

£38.14

BRASS FINIAL 11 x 42mm

£27.97

BRASS FINIAL: TORCH A = 14mm. B = 33mm. C = 49mm.

£21.88

BRASS FINIAL: TORCH A = 17mm. B = 37mm. C = 53mm.

£21.88

DIAPHRAGM LEATHER: 6inchsquare min. Sizes may vary.

£16.51

QUALITY THERMOMETER & SCALE 8inch

£309.46

QUALITY THERMOMETER & SCALE 10inch

£321.13

SPIRIT THERMOMETER 115mm & SCALE 135 x 22mm

£160.26

SPIRIT THERMOMETER 180mm & SCALE 195 x 27mm

£138.41

SPIRIT THERMOMETER, 115mm. (without scale)

£119.53

SPIRIT THERMOMETER, 175mm. (without scale)

£155.11

THERMOMETER CLIPS, CAST 3.5mm. Total width, 26mm.

£22.16

THERMOMETER CLIPS, CAST 5mm. Total width, 29mm.

£22.16

BRASS WHEEL BAROMETER BEZEL 8inch SHERATON - POLISHED & LACQUERED Wheel barometer bezel, unglazed. Dial size 8inch Sheraton

£170.64

BRASS WHEEL BAROMETER BEZEL 8inch Wheel barometer bezel, unglazed and unpolished. Dial size 8inch Outside diameter 218mm.

£64.72

BAROMETER LEVEL FRAME Rectangular level frame. External size 85mm x 45mm. Suits a hole 42mm x 80mm. Suits a brass level dial 77mm x 38mm. Requires a recess of at least 5mm. Bubble and dial not included.

£67.62

LEVEL DIAL Level dial (uncut) on 2 1/2inch square brass

£16.18

WEATHER-STATION FIGURES Painted wooden male & female figures 35mm high. Sold in pairs

£13.48

BAROMETER TUBE FILLING KIT

£30.08

BAROMETER FILLING KIT REPLACEMENT TUBE Replacement fine tubing for part number 0796 000115

£19.99

BAROMETER TUBE CLEANER 125ml If you plan to use our kit to drain, clean and refill an old tube, you will need this concentrate to remove as many of the stains as possible. Dilute with 5 parts of warm water. You will need our filling kit to insert the clean

£12.88

UNFILLED WHEEL BAROMETER TUBE Complete with guidetube, float and counterweight. Other sizes of tube can be made to order; please enquire. Please note: UNSUITABLE FOR SHIPPING. Distance from edge of main tube to edge of U tube 23mm. Height of U tube 140mm.

£80.69

WHEEL TUBE PLUG Insert this plug into the capillary when the tube has been filled with mercury. It will protect the tube by stopping the vacuum until you are ready to fit the float etc. Mercury will still pass the plug if you wave it about or allow the mer

£10.04

WOODEN MIRROR SURROUND A = 95mm B = 82mm C = 76mm

£63.64

WOODEN MIRROR SURROUND A = 100mm B = 85mm C = 76mm

£63.64

WOODEN MIRROR SURROUND A = 102mm B = 89mm C = 79mm

£63.64

WOODEN MIRROR SURROUND A = 111mm B = 102mm C = 92mm

£63.64

BAROGRAPH INK Special slow-evaporating ink for chart recorders such as barographs. Red.

£11.16

BAROGRAPH & CHART RECORDER NIB Metal nib for older style barographs. Folded, to fit simple metal arms. Designed for use with slow-evaporation ink.

£15.78

BAROGRAPH FELT NIB Modern felt tip pen style nib.

£18.68

CARD BAROMETER DIAL 130mm

£24.86

CARD BAROMETER DIAL 163mm

£24.86

CARD BAROMETER DIAL 203mm

£29.87

CONVEX MIRROR 3 1/8inch

£35.60

CONVEX MIRROR 3 1/4inch

£35.60

CONVEX MIRROR 3 3/8inch

£35.60

CONVEX MIRROR 3 1/2inch

£35.60

CONVEX MIRROR 3 3/4inch

£37.42

CONVEX MIRROR 4inch

£37.42

HYGROMETER CENTRE Centre for wild oat

£18.40

HYGROMETER BRASS DIAL 50mm diameter of etching.

£13.61

HYGROMETER BEARD Wild Oat Beard. The beard of this wild plant twists according to humidity. A balsawood pointer should be glued to one end, which indicates changes in humidity. Cultivated in Provence for maximum twist.

£5.75

HAND SETTING KNOB 8mm CHROME Requires 3.25mm hole. Maximum glass thickness 3mm.

£8.92

HAND SETTING KNOB 8mm BRASS Requires 3.25mm hole. Maximum glass thickness 3mm.

£8.92

HAND SETTING KNOB 12mm BRASS Requires 3.25mm hole. Maximum glass thickness 4mm.

£17.09

BAROMETER DIAL TRANSFER Overall diameter: 4 1/2inch Black.

£19.12

ANEROID SETTER HAND: Centre to tip: 83mm.

£14.14

BAROMETER HAND DIAMOND 5inch BLUED STEEL: Centre to tip: 107mm, overall length including tail: 180mm.

£50.63

BAROMETER HAND, DIAMOND BRASS SETTER: Centre to tip: 112mm.

£28.13

BRASS ARROW HAND FOR 8inch DIAL: Centre to tip: 87mm.

£38.87

STEEL ARROW HAND FOR 8inch DIAL: Centre to tip: 86mm, overall length including tail: 142mm.

£55.27

BRASS DIAMOND HAND FOR 8inch DIAL: Centre to tip: 83mm.

£50.48

STEEL DIAMOND HAND FOR 8inch DIAL: Centre to tip: 83mm, overall length including tail: 145mm.

£55.93

(.14) Barometer Parts